| Step | | Procedure & Parts & Tools |
| 1 |
|
Unhook the power cord from the hook.
|
| 2 |
|
Using a Phillips screwdriver, remove the screw from the power cord compartment.
| Screwdriver-phillips |
|
|
| 3 |
|
Pull to remove the compartment cover.
|
| 4 |
|
Using a Phillips screwdriver, remove the 2 screws from the power cord clamp.
| Screwdriver-phillips |
|
|
| 5 |
|
Using a small Phillips screwdriver, loosen the 3 screws in the bottom row of the terminal block. (White, green and black wires)
| Screwdriver-phillips |
|
|
| 6 |
|
Refer to this diagram when connecting the wires on the new power cord. (Black on the left, white in the middle and green on the right) Reverse process to install a new power cord.
|